|
|
TM 11-7025-217-30
10. Loosen two screws (14), turning each
screw two turns at a time, until connector
P8(15) can be removed from connector
J8(16).
11. Open two retaining arms (17) and remove
connector P3(18) from connector J3(19).
12.
Loosen two screws (20), turning each
screw two turns at a time, until connector
P5(21) can be removed from connector
J5(22).
13.
Loosen wedgelock screw (23) on each
side of power control assembly (24).
14. Remove three screws, Iockwashers, and
flatwashers (25) from power supply
chassis (13).
15. Carefully pull power control assembly
(24) from power supply chassis (13).
16. Remove power cable from power control
assembly (para 2-72).
2-110
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |