|
|
TM 11-7025-217-30
2-64. REMOVING POWER SUPPLY INTERCONNECT CABLE ASSEMBLY
Turn off power before working on equipment. Failure to do
so can cause serious injury to personnel.
1. Set POWER ON/OFF circuit breaker to
OFF.
2. Disconnect printer from power
source.
3. Separate chassis (para 2-30).
4.
Loosen two screws (1), turning each
screw two turns at a time until
connector P7(2) can be removed from
connector J7(3).
Loosen two screws (4), turning each
5.
screw two turns at a time until con-
nector P8(5) can be removed from
connector J8(6).
Remove cable assembly (7) from power
6.
supply.
2-65. INSTALLING POWER SUPPLY INTERCONNECT CABLE ASSEMBLY
1. Aline connector P8(5) with connector J8(6) and tighten two screws (4), two turns at a time until
the connector is tight.
2. Aline connector P7(2) with connector J7(3) and tighten two screws (1), two turns at a time until
the connector is tight.
3. Join chassis (para 2-31).
2-108
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |