|
|
TM 11-7025-217-30
REMOVING CONTROL PANEL
2-32.
NOTE
Perform steps 1 thru 3 to gain
access to control panel.
Remove top cover (para 2-26).
1.
Remove six screws (1) and six flatwashers (2).
2.
Carefully slide control panel (3) out of chassis (4).
3.
NOTE
Perform steps 4 thru 7 to complete removal of control panel.
4. Separate chassis (para 2-30).
5. Remove logic board (para 2-54). (Do not disconnect Connectors P15 and P16.)
6. Loosen two captive screws (5), turning each screw two turns at a time, until harness connector P4
(6) can be removed from connector J4 (7).
7. Carefully remove control panel (3).
2-75
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |