|
|
TM 11-7025-217-30
2-33.
INSTALLING CONTROL PANEL
1.
Carefully slide control panel (1) into chassis (2) and aline mounting holes.
2.
Install six screws (3) and six flatwashers (4).
3. Install top cover (para 2-27).
NOTE
Perform steps 4 thru 6 if control panel was previously removed.
4. Aline harness connector P4 (5) with connector J4 (6) and tighten two screws (7), turning
each screw two turns at a time,
5. Install logic board (para 2-55).
6. Join chassis (para 2-31).
2-76
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |