|
|
TM 11-7025-217-30
SLEEVE
METAL
R
9. Slide metal collar forward
against back of connector.
10. Clamp inside connector and
screw sleeve onto connec-
tor, turning itin direction
of arrow.
11. Remove any cable shield from under sleeve and fold it over end of sleeve.
12. Slide flange with its metal collar over sleeve.
13. Clamp sleeve
and screw flange
onto sleeve by
turning it in
direction of
arrow.
METAL
CABLE SHIELD
COLLAR
FOLDED OVER
SLEEVE
14. Using two screws and wash-
ers, install two retainers on
flange, noting that only one
of the holes on each retainer
is lipped and threaded to
fasten a screw.
2-125
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |