|
|
TM 11-7025-217-30
2-78. REMOVING DOOR INTERLOCK SWITCH
.
Turn off power before working equipment. Failure to do so
can cause serious injury to personnel .
1. Set POWER ON/OFF circuit breaker (1)
to OFF.
2. Disconnect printer from power source.
Loosen two captive thumbscrews (2)
3.
and open door (3).
4. Tag and unsolder two wires (4) from
terminals of door interlock switch (5).
5.
Remove two screws (6), two flatwashers
(7), and interlock switch (5) from right
side plate (8).
2-126
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |