|
|
TM 11-7025-217-30
2-76.
I/0 CONNECTOR REPAIR
Removing I/0 Connector.
a.
1. Remove input data cable assembly (para 2-70).
Repairing I/0 Connector.
b.
NOTE
Procedure given in the following steps is for replacement of
pin insert(s) on I/0 connector and is typical for replacement
of socket insert(s) or pin insert(s) on the following:
q Power
cable connector
If more than one pin or socket insert is to be replaced, tag
each wire.
Locate socket insert(s) to be replaced.
1.
CAUTION
0
0
0
0
0
0
0
0
0
0
0
0
0
When removing cable tie, be careful
0
0
0
0
not to cut wires.
2. Cut cable tie to gain access to wires.
CONNECTOR
FRONT VIEW
3. Aline wire of pin insert to be re-
moved with slotted part of REMOVAL
TOOL, as shown.
2-120
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |