|
|
TM 11-7025-217-30
2-70. REMOVING INPUT DATA CABLE ASSEMBLY
Turn off power before working on
equipment. Failure to do so can
cause serious injury to personnel.
1. Set POWER ON/OFF circuit breaker to
OFF.
2, Disconnect printer from power source.
3, Separate chassis (para 2-30).
4. Open clamp (1) and remove connector
P16(2) from connector J16(3).
Remove power converter
5.
assembly (para 2-66).
6. Remove four screws (4), eight flat-
washers (5), four Iockwashers (6), and
four nuts (7).
7. Carefully remove input data cable
assembly (8) from power supply
housing (9).
2-116
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |