|
|
TM 11-7025-217-30
REMOVING STEPPER MOTOR AND DOOR HARNESS ASSEMBLY
2-52.
1.
Remove spring loaded roller assembly
(para 244).
2.
Remove drive roller assembly (para
3.
Remove guide rolIer assembly
4.
Loosen two captive screws (1), turning
each screw two turns at a time, until
harness connector P11 (2) can be removed
from connector J11 (4).
5.
Remove two screws (3) and remove
connector J11 (4) from door (5).
6.
Cut and discard harness tie (6) from motor
assembly (7).
7.
Remove two screws (8) and two flatwashers (9) from wire lugs (10). Tag wires.
8.
Remove two screws (11).
9. Slide motor assembly (7) back and disconnect drive belt (12) from drive spur (13).
10.
Remove stepper motor and door harness assembly (7) from door (5).
11.
Remove two screws (14) and motor mount (15).
12.
Loosen setscrew (16) and remove drive spur (13).
2-92
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |