|
|
TM 11-7025-217-30
4. Install screw (7),
NOTE
If spring loaded roller
assembly was removed,
go to step 6.
5. Cut and discard lacing tape (8).
6. Close door (2) and tighten two
captive thumbscrews (9).
2-48.
REMOVING GUIDE ROLLER ASSEMBLY
Remove spring loaded roller assembly (para 2-44).
1.
2.
Remove screw (1).
Using a 1/16-inch drift pin, drift shaft (2)
3.
through mounting hole on door (3) and
remove shaft.
4.
Remove bushing (4), guide roller (5)
and shims (6).
2-90
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |