|
|
TM 11-7025-217-30
3.
If pressure measured during test (para
2-28) is less than 3.7 ounces (105 grams),
loosen two outside adjustment screws (4)
and tighten two inside adjustment
screws (5).
4.
If pressure measured during test (para
grams), loosen two inside adjustment
screws (5) and tighten two outside
adjustment screws (4).
Perform printhead pressure test (para
5.
until printhead pressure is within specified
limits.
6.
Install protective cover (3), four flat-
washers (2), and four screws (1).
Close door (6) and tighten two captive
7.
thumbscrews (7).
8.
Install top cover (para 2-27).
2-72
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |