|
|
TM 11-5805-387-10-2
NOTE
For DC LOOP NO. 2, meter will
register in right scale
(upscale) when loop battery
module INTERNAL-
EXTERNAL switch is in the
INTERNAL position.
Meter will register in left scale
(downscale) when in
EXTERNAL position.
2-14. REMOTE OPERATION
Modem remote operation is described in the technical manual for
each type of system and remote control used.
Usually modem is pre-set in a correct operating mode and remotely
keyed.
2-15. STOPPING PROCEDURE
Set RCV/SEND switch at RCV.
To disable modem, place ON/OFF switch
to OFF position.
Section IV. OPERATION UNDER UNUSUAL CONDITIONS
Since the modem must be used as part of a system, operation under unusual
conditions may be found in the manual for the specific radio teletypewriter
set with which it is used. Refer to TM-5815-334-10, chapter 2, section IV
for specifics on cold weather operation.
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |