|
|
TM 11-7025-21740
2-61. INSTALLING PRINT SYSTEM ASSEMBLY
CAUTION
Exercise care in installing print system assembly. This assembly
can be easily damaged by the use of undue force during instal-
lation or by careless handling. Exercise care in dressing wires
so they will not be pinched or jammed by the door or other
components of the printer mechanics subassembly. Ensure
motor harness assembly is routed to right of standoffs.
1. Carefully install print system assembly
(1) into printer machanics sub-
assembly (2).
2. Aline four mounting holes in print
system motherboard (3) with stand-
offs on bottom plate of printer
mechanics subassembly (2). Apply
retaining compound (item 6, Appx B)
to threads of the four standoffs (4)
and install.
3. Install two screws (5) and printhead
stop (6) on each side of printer
mechanics subassembly (2).
4.
Install protective plastic (7), four
flatwashers (8), and four screws (9).
NOTE
Apply retaining compound (item 6,
Appx B) to threads of screws in
step 5.
5. Aline and insert rod (10) into tracking
bar (11). Install tracking bar (11 ) and
two screws (12) into printer mechanics
subassembly (2).
2-102
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |