Section IV. MAINTENANCE PROCEDURES

TM 11-7025-217-30

2-23. GENERAL

This section contains instructions for direct support maintenance of the printer. Procedures are included

for cleaning, inspection, removing, repairing, printhead pressure testing, adjusting, and installing the

equipment as authorized by the maintenance allocation chart, contained in TM 11-7021-201-12.

2-24. CLEANING

Turn off power before working on equipment. Failure to do

so can cause serious injury to personnel.

NOTE

Cleaning of printer is limited to cleaning print fingers as given

in the following steps.

1. Set POWER ON/OFF circuit

breaker (1) to OFF.

Disconnect printer from

power source.

Loosen two captive thumb-

screws (2) and open door

(3).

2-67