REMOVE/REPLACE CARRIAGE ASSEMBLY IDLER PULLEYS (cont)

TM 11-7025-233-23

4-33. REMOVE/REPLACE CARRIAGE ASSEMBLY IDLER PULLEYS (CONT)

6. Lift out belt and pulley from spring

bracket arms.

7. Remove pulley and shaft. Retain

shaft.

8. Remove carriage drive motor (para

4-34, Remove, steps 2-6).

Replace

1. There are three idler pulleys.

q If

you are replacing left idler

pulley, do steps 2-10 and 15-16

q If

you are replacing one or both

right idler pulleys, do steps 12-16

3. Hold pulley, shaft, and drive belt

with one hand.

3. With other hand insert screwdriver

through hole and press spring

support to release tension until

pulley shaft is over notches in

spring support.

4-83