REMOVE/REPLACE 2K EXTENDED LINE BUFFER BOARD

TM 11-7025-233-23

4-14. REMOVE/REPLACE 2K EXTENDED LINE BUFFER BOARD

INITIAL SETUP

Common Tools

q Tool kit

Remove

1. Remove side frame support (para

2. Disconnect two ribbon cable

connectors.

3. Loosen screw until buffer board is

disengaged from logic board.

4. Using pliers, squeeze each plastic

standoff and loosen locking device

to free board.

5. Remove board from printer.

Replace

1. Install buffer board on plastic

standoffs on logic board. Push down

on the board until it snaps in place.

2. Tighten screw.

3. Connect two ribbon cable connectors

from buffer board to logic board.

4. Replace side frame support (para

4-42