|
|
TM 11-7025-217-30
INSTALLING ILLUMINATION CIRCUIT BOARD ASSEMBLY
2-43.
Close door (1) and tighten two captive
1.
thumbscrews (2).
Install two screws (3), two flatwashers
2.
(4), and illumination circuit board
assembly (5) on door (1).
Put illumination reflector (6) in place as
3.
shown.
Install two screws (7) hand tight.
4.
5.
Open door (1) partway, install two screws (8),
and tighten two screws (7).
6.
Close door (1) and tighten two captive
thumbscrews (2).
2-83
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |