|
|
TM 11-7025-217-30
2-16. MAIN INTERCONNECTION CABLE ASSEMBLY CONTINUITY TEST
1. Remove main interconnection cable assembly (para 2-56).
2. Check cable assembly for bare wires, physical damage, and shorts between pins.
NOTE
Use a spare connector pin as an aid when making continuity
checks.
3. Measure continuity of cable assembly (table 2-3).
4.
If wiring problems exist, repair or replace assembly as required.
5.
Install main interconnection cable assembly (para 2-57).
2-60
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |