Motor does not start.

TM 11-5815-238-20

Table 2-2. TROUBLESHOOTING - Continued

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION

2. Motor does not start.

Step 1. Check for blown fuses, broken wires, defective power switch.

Replace blown fuses, report all other defects to next higher maintenance level.

Step 2. Use Multimeter ANIUSM-451 to check ac wall socket for 115 volts ac or 230 volts ac input voltage.

Step 3. Check ac cable for breaks.

If these steps do not correct problems, higher category of maintenance is required.

2-21