REMOVE/REPLACE PRINT POSITION INDICATOR BOARD (T3PPI/1)

TM 11-7025-233-23

4-15. REMOVE/REPLACE PRINT POSITION INDICATOR BOARD (T3PPI/1)

INITIAL SETUP

Common Tools

q Tool kit

Remove

1. Access printer (para 4-11).

2. Move control panel out of way.

3. Disconnect PPI ribbon cable

connector (P2) from logic board.

CAUTION

Lift PPI board straight out to avoid

bending pins.

4. Push inward on bracket clips, then

lift rear of board to disengage

assembly from frame support.

5. Lift out PPI board and plastic

support bracket.

6. If necessary, remove screw securing

PPI board to bracket.

4-43