REPAIRING CHASSIS

TM 11-7025-217-30

2-80. REPAIRING CHASSIS

a. The only repairs that can be made to the printer chassis are replacing the dowel pins and screw

thread inserts. Replace these parts when defective or missing using standard operating procedures. Refer

to TM 11-7025-21 7-30P for a parts listing.

SCREW

THREAD

CHASSIS

Section V. PREPARATION FOR STORAGE OR SHIPMENT

2-81. STORAGE OR SHIPMENT PROCEDURES

Prior to packing printer, the following procedures must be performed:

1. Remove paper from spool and printer door. Refer to TM 11-7021-210-12, Chapter 2.

2. Perform routine PMCS. Refer to TM 11-7021-201-12, Chapter 2.

b. The printer is repacked for storage or shipment in its original packaging materials.

2-128