Chapter 3. MAINTENANCE INSTRUCTIONS

TM 11-7025-217-30

CHAPTER 2

MAINTENANCE INSTRUCTIONS

Section 1. REPAIR PARTS, SPECIAL TOOLS, TMDE, AND

SUPPORT EQUIPMENT

2-1. TOOLS AND TEST EQUIPMENT

Tools and test equipment required for direct support maintenance of the equipment are listed in the

Maintenance Allocation Chart (MAC) in TM 11-7021-201-12.

2-2. SPECIAL TOOLS, TMDE, AND SUPPORT EQUIPMENT

Special tools, TM DE, and support equipment are listed and illustrated in the repair parts and special

tools list TM 11-7025217-30P covering direct support maintenance for this equipment

2-3. REPAIR PARTS

For authorized listed and illustrated repair pare, refer to TM 11-7021-217-30P.

Section Il. SERVICE UPON RECEIPT

2-4. SERVICE UPON RECEIPT OF MATERIEL

a. Unpacking The printer is packed in its own shipping carton. Unpack the equipment as follows:

(1) Open shipping carton and remove equipment.

(2) Place equipment on a suitable clean and dry surface for inspection.

(3) Keep all shipping materials for use in repacking and reshipping.

b. Checking Unpacked Equipment.

(1) Inspect the equipment for damage incurred during shipment. If the equipment has been

damaged, report the damage on SF 384, Report of Discrepancy.

(2) Check the equipment against the packing slip to see if the shipment is complete. Report all

discrepancies in accordance with the instructions of DA PAM 738-750.

(3) Check to see whether the equipment has been modified.

2-5. INSTALLATION INSTRUCTIONS

Refer to your applicable systems manual for installation instructions for the equipment.

2-1