TM 11-5815-206-12/ TO 31W4-2pGC1-61
1-10. Expendable Consumable Supplies and
Expendable Consumable Supplies and Materials
are listed in table 1-1.
Table 1-1. Expendable Consumable Supplies and Materials
The supplies and materials listed in this table are required for operation of this equipment and are
authorized to be requisitioned by SB 700-50. The NSN for the applicable unit of issue required can be
found in appropriate supply catalogs. The FSCM is used as an element in item identification to
designate manufacturer or distributor or Government agency, etc., and is identified in SB 708-42.
Fed. Spec. W-P-547C, type 1,
Records message on paper
Kleinschmidt part No. 10901
Fuse FO2A250V 1/8 amp.c
Protects line circuit
Fuse 1.6 amp. 125 voltd
Fuse, cartridge, 2 amp.e
Russman Part No. MDXZ
M I L - F - 1 5 1 6 0 , Part No.
Fuse, cartridge, 3 amp.
Lamp, 120V. 10W. double
contact, bayonet candelabra
Operator's and organizational
2ea. rolls furnished with equipment.
b2ea. furnished with equipment.
7ea. furnished with TT-4(*)/TG, TT-335/TG, TT-537/G, TT-698(*)\TG, and TT-722(*)\TG
7ea. furnished with TT-335/TG and TT-537/G (1 mounted, 6 spare).
6ea. furnished with TT-335/TG and TT-537/G (1 mounted, 5 spare),
2 ea. furnished with TT-4(*)/TG, TT-335/TG, TT-537/G, TT-698(*)/TG, and TT-722(*)/TG
1ea. furnished with TT-4(*)/TG, TT-335/TG, TT-537/G, TT-698(*)TG, and TT-722(*)/TG
1-11. Common Names
Teletypewriter Set AN/PGC-1 and AN/PGC.3
TT-4B/TG, TT-4C/TG, TT-335/TG,
TT-537/G , TT-698/TG , TT-698A/TG,
T T - 6 9 8 B / T G , TT-722\TG, and TT-T22A\TG case
Cases CY-694/PGC-1 and CY-694A/PGC-1
12). The immersionproof cover is held to the
teletypewriter base with spring-loaded clamps. The
The teletypewriter set consists of a lightweight
dust cover includes a window, copyholder,
teletypewriter (fig. 1-1) and a canvas bag which
operating instruction panel, and hinged doors (fig.
contains three cable assemblies (fig. 1-5. Only the
power cable is furnished with the TT-698(*)/FG.
b. The major mechanical subdivisions of the
a. The teletypewriter includes a send-receive
teletypewriter (fig. 1-7), a wooden transportation
( f i g . 1-9), type-bar carriage, platen assembly,
selector mechanism, paper storage assembly (fig.
an immersionproof cover (fig. 1-11), a set of
1-10), the motor and accessory gears, all secured to
running spares (fig. 1-4), a tuning fork, mounted
the main frame assembly of the teletypewriter. A
within the dust cover, and an accessory worm and
line terminal board and a control panel are
worm gear (fig. 1-6). The teletypewriter base in-
mounted on the left-front corner of the
eludes hooks for lashing the teletypewriter to a
teletypewriter under the dust cover (fig. 1-9).
packboard for manual transport (fig. 1-11 and 1-